R4 Electric strike interlock version 24V - basic version

Note

The R4 Electric Strike is designed for remote opening of door and gates left- and right side and double-wing ones. It works together with ratchet-latch or ratchet type door lock.
The advantage of this catch is its small dimensions and its symmetrical design thanks to which the version can be mounted both to left- and right side door. The additional advantage is the increased reliability of operation in case of twisted doorframe or distorted door.

They are made of rust proof zinc alloys, so they can be installed outside buildings, however in such case they should be protected against flooding, hostile weather impacts and against accidental coating by paint.
Additional plate is required for mounting.

Electric strike version

The interlock version - acts in the same way as the basic version, but has an additional ratchet interlock function, thanks to which, when the interlock lever is moved, the door is left open permanently, without the use of an electronic pulse. When the interlock lever is moved back to its original position, the lock works as in the basic version.
This version may be used in rooms, where temporary unblocking of the door may be sometimes needed within working hours, i.e.: in office or services areas. When working hours are over, it is possible to block the lock again, whereby access to the premises is controlled by means of an interphone set system.

When working, the lock gives out a low, humming noise.

Basic technical data

external housing dimensions:	21 x 29 x 68 mm
weight:	0,16 kg
allowable thrust on the door at ratchet release:	30N (3 kG)
allowable load of the door impacting the lock:	3000 N (300 kG)
rated voltage U:	24 ± 2V
allowable uninterrupted operation time:	30 min.
ratchet:	adjustabele within the range of 3 mm, which allows for door clearance adjustment

Current consumption

Voltage U	22V	24V	26V	22V	24V	26V
Electric strike version	Alternating Current (AC) [mA]			Direct Current (DC) [mA]
R4-24.20	80	90	100	120	130	140

Documentation

R4 Electric strikes meet the essential requirements of the EMC Directive 2004/108/WE.

Product code: R4-24.20