R3 Electric strike memory version 12V - for tighten door

Note

The R3 Electric Strike is designed for remote opening of left, right (if construction of door frame allows it), and double-wing doors and gates. It is designed to be installed within a doorframe, in which it is possible to make a 23x29x91 mm mounting hole (draw on the right).
The lock was made smaller, to the dimensions as indicated, by using a leverage system, thanks to which most doorframes can accommodate our locks.

The R3 Electric Strike can work together with home interphone installation in all types of an entrance door. It is made of rust proof zinc alloys. It can be installed externally, provided that it is protected against flooding, against hostile weather impacts, and against being covered with paint. Additional plate is required for mounting.

Electric strike version

Memory version - the memory function makes it possible to open the door without the use of a key. When the electrical pulse is released using the Uniphone button, the lock "memorises" it, which means that it unblocks the ratchet until the door is open. When the door gets closed, the memory is cleared, and the lock returns to its original status.
This function can be used:
- when the user wants to leave the room without using the key or the knob;
- when the user has several doors to go through, he or she can unblock them all with a single, short electric pulse;
- when the entry procedure is prolonged.

NOTE: If the door is not opened, the ratchet (and thus the door itself) will also remain in its unblocked status.

For tighten door - at constant pressure on the door (e.g. by wind power, door seal, etc.) about 5-15 kg on the lock bolt, electric strike can open the door, in contrast to Electric strike - basic version.

When working, the lock gives out a low, humming noise.

Basic technical data

external housing dimensions:	20 x 28,5 x 90 mm
weight:	0,20 kg
allowable thrust on the door at ratchet release:	30N (3 kG)
allowable load of the door impacting the lock:	3000 N (300 kG)
rated voltage U:	10 ± 2V *
allowable uninterrupted operation time:	30 min.
ratchet:	adjustabele within the range of 3 mm, which allows for door clearance adjustment
* with bell transformer

Current consumption

Voltage U	8V	10V	12V	8V	10V	12V
Electric strike version	Alternating Current (AC) [mA]			Direct Current (DC) [mA]
R3-12.36L	320	500	620	680	800	950

Determining left- and right-hand doors

The door should be determined from the side of hinges are visible.

Documentation

R3 Electric strikes meet the essential requirements of the EMC Directive 2004/108/WE.

Product code: R3-12.36L