R3 Electric strike interlock version 12V - RIGHT - basic version

Note

The R3 Electric Strike is designed for remote opening of right, left (if construction of door frame allows it), and double-wing doors and gates.
The lock was made smaller, to the dimensions as indicated, by using a leverage system, thanks to which most doorframes can accommodate our locks.

The R3 Electric Strike can work together with home interphone installation in all types of an entrance door. It is made of rust proof zinc alloys. It can be installed externally, provided that it is protected against flooding, against hostile weather impacts, and against being covered with paint. Additional plate is required for mounting.

Electric strike version

The interlock version - acts in the same way as the basic version, but has an additional ratchet interlock function, thanks to which, when the interlock lever is moved, the door is left open permanently, without the use of an electronic pulse. When the interlock lever is moved back to its original position, the lock works as in the basic version.
This version may be used in rooms, where temporary unblocking of the door may be sometimes needed within working hours, i.e.: in office or services areas. When working hours are over, it is possible to block the lock again, whereby access to the premises is controlled by means of an interphone set system.

Right version - making it possible to unblock the door upon voltage being supplied to the coil. Used wherever the door lock`s design makes it impossible to use the standard "left" version.

When working, the lock gives out a low, humming noise.

Gallery

Basic technical data

external housing dimensions:	20 x 28,5 x 90 mm
weight:	0,20 kg
allowable thrust on the door at ratchet release:	30N (3 kG)
allowable load of the door impacting the lock:	3000 N (300 kG)
rated voltage U:	10 ± 2V *
allowable uninterrupted operation time:	30 min.
ratchet:	adjustabele within the range of 3 mm, which allows for door clearance adjustment
* with bell transformer

Current consumption

Voltage U	8V	10V	11V	12V	8V	10V	11V	12V
Electric strike version	Alternating Current (AC) [mA]				Direct Current (DC) [mA]
R3-12.20P	270	360	370	420	420	550	620	650

Determining left- and right-hand doors

The door should be determined from the side of hinges are visible.

Documentation

R3 Electric strikes meet the essential requirements of the EMC Directive 2004/108/WE.
Read the declaration of conformity for R3 Electric strikes
Download product catalog card

Product code: R3-12.20P