R3 Electric strike 12V - basic version

Note

The R3 Electric Strike is designed for remote opening of left, right (if construction of door frame allows it), and double-wing doors and gates. It is designed to be installed within a doorframe, in which it is possible to make a 23x29x91 mm mounting hole (draw on the right).
The lock was made smaller, to the dimensions as indicated, by using a leverage system, thanks to which most doorframes can accommodate our locks.

The R3 Electric Strike can work together with home interphone installation in all types of an entrance door. It is made of rust proof zinc alloys. It can be installed externally, provided that it is protected against flooding, against hostile weather impacts, and against being covered with paint. Additional plate is required for mounting.

Electric strike version

Basic version - the basic type, making it possible to unblock the door upon voltage being supplied to the coil.

When working, the lock gives out a low, humming noise.

Basic technical data

external housing dimensions:	20 x 28,5 x 90 mm
weight:	0,20 kg
allowable thrust on the door at ratchet release:	30N (3 kG)
allowable load of the door impacting the lock:	3000 N (300 kG)
rated voltage U:	10 ± 2V *
allowable uninterrupted operation time:	30 min.
ratchet:	adjustabele within the range of 3 mm, which allows for door clearance adjustment
* with bell transformer

Current consumption

Voltage U	8V	10V	11V	12V	8V	10V	11V	12V
Electric strike version	Alternating Current (AC) [mA]				Direct Current (DC) [mA]
R3-12.10L	270	360	370	420	420	550	620	650

Determining left- and right-hand doors

The door should be determined from the side of hinges are visible.

Documentation

R3 Electric strikes meet the essential requirements of the EMC Directive 2004/108/WE.

Product code: R3-12.10L