R3 Electric strike 12V AC - unlimited time version

Note

The R3 Electric Strike is designed for remote opening of left, right (if construction of door frame allows it), and double-wing doors and gates. It is designed to be installed within a doorframe, in which it is possible to make a 23x29x91 mm mounting hole (draw on the right).
The lock was made smaller, to the dimensions as indicated, by using a leverage system, thanks to which most doorframes can accommodate our locks.

The R3 Electric Strike can work together with home interphone installation in all types of an entrance door. It is made of rust proof zinc alloys. It can be installed externally, provided that it is protected against flooding, against hostile weather impacts, and against being covered with paint. Additional plate is required for mounting.

Electric strike version

This version gives out no noise at all.

The unlimited work time version - features a unique coil design, which allows the lock to work under voltage continuously.
This type of lock is in rooms, where it is desirable to block the doors by cutting of voltage supply, e.g.: in offices, when the work is over, all doors are locked when voltage supply is cut off. This version may also work as the basic version.
It does not interfere with the work of electronic interphone systems.
In case of DC power it is recommended to use lowered current consumption version. => R3 Electric strike 12V - lowered current consumption version

AC - designed for alternating current (AC) only.

Basic technical data

external housing dimensions:	20 x 28,5 x 90 mm
weight:	0,20 kg
allowable thrust on the door at ratchet release:	30N (3 kG)
allowable load of the door impacting the lock:	3000 N (300 kG)
rated voltage U:	11 ± 1V *
allowable uninterrupted operation time:	unlimited
ratchet:	adjustabele within the range of 3 mm, which allows for door clearance adjustment
* with bell transformer

Current consumption

Voltage U	10V	11V	12V
Electric strike version	Alternating Current (AC) [mA]
R3-12.12L-AC	210	230	250

We recommend to connect the electric strike to alternating current only.

Determining left- and right-hand doors

The door should be determined from the side of hinges are visible.

Documentation

R3 Electric strikes meet the essential requirements of the EMC Directive 2004/108/WE.