R3 Electric strike 12V AC - RIGHT - reverse action version

Note

The R3 Electric Strike is designed for remote opening of right, left (if construction of door frame allows it), and double-wing doors and gates.
The lock was made smaller, to the dimensions as indicated, by using a leverage system, thanks to which most doorframes can accommodate our locks.

The R3 Electric Strike can work together with home interphone installation in all types of an entrance door. It is made of rust proof zinc alloys. It can be installed externally, provided that it is protected against flooding, against hostile weather impacts, and against being covered with paint. Additional plate is required for mounting.

Electric strike version

Reverse action version - or the so-called reverse lock. In its volt-free condition, the lock is unblocked. As soon as voltage is fed to it, the lock`s lever blocks the ratchet. This version is mainly used in general use areas, where fire-fighting and work health and safety regulations impose the condition that the door must be unblocked in voltage drop situations, e.g. at schools, cinemas, office areas, etc.

Right version - making it possible to unblock the door upon voltage being supplied to the coil. Used wherever the door lock`s design makes it impossible to use the standard "left" version.

AC - designed for alternating current (AC) only.

This version gives out no noise at all.

Gallery

Basic technical data

external housing dimensions:	20 x 28,5 x 90 mm
weight:	0,20 kg
allowable thrust on the door at ratchet release:	30N (3 kG)
allowable load of the door impacting the lock:	3000 N (300 kG)
rated voltage U:	11 ± 1V *
allowable uninterrupted operation time:	unlimited
ratchet:	adjustabele within the range of 3 mm, which allows for door clearance adjustment
* with bell transformer

Current consumption

Voltage U	10V	11V	12V
Electric strike version	Alternating Current (AC) [mA]
R3-12.13P-AC	210	230	250

We recommend to connect the electric strike to alternating current only.

Determining left- and right-hand doors

The door should be determined from the side of hinges are visible.

Documentation

R3 Electric strikes meet the essential requirements of the EMC Directive 2004/108/WE.
Read the declaration of conformity for R3 Electric strikes
Download reverse action version manual
Download product catalog card

Product code: R3-12.13P-AC